MTU open diesel generator set
|Terms of Trade:||FOB,CIF,EXW|
|Min. Order:||1 Set/Sets|
|Packaging:||Standard Seaworthy Packing|
|Productivity:||100 Sets One Month|
|Place of Origin:||China|
|Supply Ability:||100 Sets One Month|
MTU Diesel Generator set adopts advanced ADEC electronic management system, and is the first batch of companies to use advanced common rail injection technology. Under the precise control of the electronic management system, the injection is more precise, the combustion is less and less, and the fuel is more abundant. Lower consumption, and energy saving and environmental protection.
1. Convenient maintenance: water-cooled four-stroke 90°V-type cylinder layout, turbocharged intercooler, wet replaceable cylinder liner, one cylinder and one head, dry exhaust manifold, easy to maintain.
2. Intelligent operation: Adopt a dedicated ADEC electronic management system, which can provide accurate digital electronic speed control function, set data collection points in key parts of the fuselage, realize fault self-diagnosis and automatic display, intelligent unit operation, CAN bus technology . (Diesel Generator set 4000: when the load is low, the set will automatically switch to half-cylinder working state)
3. High operational reliability: adopts three-gas ring aluminum alloy piston structure, piston ring adopts wear-resistant cast iron, valve seat insert ring structure, long service life, piston oil injection cooling, effective heat dissipation and heat dissipation, and more reliable operation.
4. Energy saving and environmental protection: It adopts a unique electronic control unit fuel injection pump, direct fuel injection in the cylinder, emission is better than the German TA Luft standard, electronic intelligent management, lower fuel consumption, and breakthrough 200g/Kw.h bottleneck. (Diesel Engine Generator 4000: the first to use advanced common rail injection technology, under the precise control of the electronic management system, the injection is more precise, the combustion is more complete, and the fuel consumption is lower)
5. Excellent performance: stable operation, low vibration, low fuel consumption rate, low fuel consumption rate, long service life, long overhaul period and low noise.
MTU Diesel Generator Sets have reliable performance and excellent quality, which can meet the needs of high-end users at home and abroad.
1. MTU diesel generator selects reasonable structure design, modular structure design, convenient maintenance.
2. This open type diesel generator uses advanced engine electronic management system- MDEC system.
3. Complete fuel injection system-common rail fuel injection system.
4. Adopt turbocharger technology and cooling technology-sequential turbocharger and dual circuit cooling water circulation system.
5. The engine is highly adaptable. When the altitude reaches 400m and the ambient temperature reaches 40°C, no power correction is required; excellent engine load response characteristics.
6. Excellent fuel economy, low fuel consumption rate and engine oil consumption rate, the index can reach 190~200g/Kw.h, and the operating cost is low.
7. Excellent exhaust emission index, NOx value <2000mg/m; low particle emission, which can meet all emission standards.
8. No start-up white smoke; low noise, low vibration; excellent volume ratio power and weight ratio power indicators.
9. Electronic management system with self-diagnosis function.
10. Long time between overhauls, up to 24,000 hours.
11. The oil change interval of high-quality engine oil reaches 1000 hours, which can run for 24 hours.
MTU open type -50HZ
MTU open type -60HZ
Prime Power (KVA/KW)
Model Engine VPD800M6 800 640 880 700 12V2000G45 3680×1700×2160 5440 VPD900M6 900 720 1000 800 12V2000G85 3950×1700×2160 6200 VPD1025M6 1025 820 1125 900 16V2000G45 4350×1730×2300 7000 VPD1138M6 1138 910 1251 1000 16V2000G85 4350×1730×2300 7250 VPD1375M6 1375 1100 1500 1200 18V2000G85 4550×1900×2500 8000 VPD1819M6 1819 1455 2000 1600 12V4000G43 5765×2200×2500 12250 VPD2000M6 2000 1600 2200 1760 12V4000G83 5765×2200×2500 12500 VPD2250M6 2250 1800 2500 2000 16V4000G43 6320×2600×2650 14500 VPD2625M6 2625 2100 2875 2300 16V4000G83 6595×2600×2650 15000 VPD2875M6 2875 2300 3125 2500 20V4000G43 8300×2555×2690 20500 VPD3125M6 3125 2500 3438 2750 20V4000G83 8300×2555×2690 21000 VPD3638M6 3638 2910 4000 3200 20V4000G83L 8300×2555×2690 21000
Jiangsu Vantek Power Machinery Co., Ltd
JIANGSU VANTEK POWER MACHNIERY CO., LTD (VANTEK POWER) was established on August 17, 2017. It is a young and experienced power equipment solution provider, mainly engaged in research/design/manufacturing/installation of marine/land-use Generator sets/ Commissioning and its services provide comprehensive solutions for power generation systems. The power ranges from 8KW to 4000KW, including diesel and Gas Generator Sets for various purposes. Industrial land-use generator sets include open frame type/silent type/container type/trailer type and its mobile power vehicle series. Marine generator sets include marine main generator/berth and emergency generator sets. We are also committed to solutions for offshore platform generator sets and their power distribution systems.
The company pays attention to product quality and has passed the ISO9001:2015 quality management system certified by CCS classification society. We can also provide ABS, BV, DNV, GL, LR, RS, KR, RINA, BKI classification society certifications for marine crews.
- Company Name: Jiangsu Vantek Power Machinery Co., Ltd
- Representative: Yu Junfeng
- Product/Service: Cummins Diesel Generator , Perkins Diesel Generator , Open Type Diesel Generator , Silent Type Diesel Generator , Marine Diesel Generator , Gas Generator Set
- Capital (Million US $): 66,000,000RMB
- Year Established: 2017
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 31% - 40%
- Total Annual Purchase Volume (Million US $): US$2.5 Million - US$5 Million
- No. of Production Lines: 1
- No. of R&D Staff: Fewer than 5 People
- No. of QC Staff: Fewer than 5 People
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: 泰州市海陵区梅兰东路59号6幢
- Contact Person: Mr. Cao
- Tel: 86-0523-81556166