Find Refrigerant For Wind Turbines Generator, Dielectric Coating For Wind Turbines Generator, Fluoride Solution For Wind Turbines Generator on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Fluorocarbon Refrigerant > Refrigerant For Wind Turbines Generator > Liquid Fluorocarbon Refrigerant for Wind Turbines generator

Liquid Fluorocarbon Refrigerant for Wind Turbines generator

Basic Info

Model No.: TUWF-47

Product Description

Liquid Fluorocarbon Refrigerant for Wind Turbines Generator

Fluorocarbon Cooling medium has Excellent electrical insulation,high dielectric constant, ideal chemical inertia,

excellent thermal conductivity and good system compatibility,The fluoride solution can be widely used in

cooling system of heating parts inside the wind generator



The characteristic of the dielectric coating:

*Fluorocarbon Refrigerant ideal chemical inertia and can be widely used in various temperature-controlled heat dissipation occasions;

* Fluorocarbon Cooling Medium low boiling point is a very moderate one. There is evaporation in the course of work, which take heat away through the heat of evaporation, thus ensuring the heating parts can work well and stably;

* Refrigerant For Wind Turbines Generator Non-dangerous goods, non-flammable and non-explosive, no fire point and flash point;

* Fluorine Refrigerant good electrical insulation, extremely high breakdown voltage above 40KV;

* The dielectric constant below 2 doesn`t make data lost in data center applications ;

*Chemical Coating good fluidity, lower viscosity than clear water; Can flow well and dissipate heat in the temperature control system;

*Material Coating nontoxic, harmless, non-irritating;

*Eco Friendly Refrigerants environmentally friendly, have ODP value of 0 and extremely low GWP value


Refrigerant for Wind Turbines Generator


The physicochemical parameter of the products:

Parameter

TUWF-47

TUWF-110

TUWF-160

dielectric constant

1.89

1.96

3.82

dielectric strength

55KV

52KV

40KV

surface tension

12.2mN/m

12.7mN/m

1.154mN/m

boiling point

47°C

110°©C

165°C

density

1.62g/ml

1.83g/ml

1.63g/ml

saturated water content

40ppm

50ppm

160ppm

critical temperature

205°C

--

--

PH value

7

7

7

flash point

No

No

No

fire point

No

No

No

ODP

0

0

0

GWP

7

low

low

specific heat

1.26 J/g°C

1.41J/g°C

1.35 J/g°C

heat of vaporization

121.7 J/g°C

136J/g°C

--

viscosity

0.55 mPa.s

0.87 mPa.s

1.24mPa.S

inhalation toxicity

low toxicity

low toxicity

low toxicity

Product use:

This series of products are not only widely used in a variety of temperature-controlled heat

dissipation system, especially suitable for every link of the semiconductor manufacturing; but

also extensively applied to the immersion cooling for computer server system and other cooling

and heat dissipation, such as wind–driven generator and the inside the generator set, the

immersion cooling medium for high-voltage transformer, the cooling system for electric vehicle

battery and Phased Array Radar etc.

Product packaging:

This series of products are packed with 25kg/barrel, or for customer customization.

Product storage and transportation:

This series of products are easily store and transport.

Contact us if you need more details on Refrigerant for Wind Turbines Generator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Dielectric Coating for Wind Turbines Generator、Fluoride Solution for Wind Turbines Generator. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Fluorocarbon Refrigerant > Refrigerant For Wind Turbines Generator

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters